Cartomizer starter kit
A great starter kit for getting started with cartomizers. No cheap parts or components here. Only the highest quality Boge cartomizers, batteries and accessories bundled into this fantastic cartomizer starter kit to give you everything you need to get going.
5 x low resistance Boge cartomizers
2 x 650 mAh batteries
1 x aluminium drip tip
1 x USB charger
1 x Cig Electric large zip case
1 x 10 ml bottle of E-liquid
650 mAh battery
The next generation of electronic cigarette batteries. It’s compact design, amazing performance, long charge life and low cost make it the ‘go to’ battery for any electronic cigarette user. Features a 5 click on, 5 click off safety function.
Cartomizer starter kit Guide
How to Fill your Electronic Cigarette
Filling your cartomizer starter kit is very easy. It is very important that the heating element in the device is saturated with liquid and not dry when you first use it. Otherwise this can lead to burning the material and leaving a burnt taste in the device which is difficult to remove.
Filling the Cartomizer
- Remove from packet and remove both plastic covers (condoms)
- Take the larger of the 2 condoms and remove the plastic plug from within
- Fill this condom with e-liquid leaving a 0.5 cm gap at the top
- Remove the rubber cap on the end of the cartomizer using a paper clip or similar
- Slowly insert cartomizer SCREW END first into the condom until you see the e-liquid come up to the top of the center hole without spilling over
- As the e-liquid is absorbed slowly push the cartomizer deeper until the e-liquid comes back to the top of the hole
- Repeat until all the e-liquid is soaked in (this may take several minutes)
- Allow a few minutes for the e-liquid to soak though the device and add more e-lquid to the top if necessary
- Gently blow through the top to clear any liquid in the center tube
- Attach drip tip and connect to battery. The device is now ready and can be re-filled by dripping onto the top material (avoiding the center hole) from now on.
Using your Cartomizer Starter Kit
Using your cartomizer starter kit. Once you have filled the cartomizer and attached the battery its ready to go.
- The batteries come pre charged and locked. click the power button 5 times to unlock.
- Press and hold the button on your battery to activate. Take a slow and steady draw on the mouthpiece for 3-5 seconds. The longer you draw the more vapour you will get and the stronger the throat hit will be. This may take a little practice but will become second nature and soon you will be producing large amounts of vapour and great throat hit.
- Pressing the button 5 times in arrow will lock / unlock the battery to avoid activating unintentionally.
- The battery has a 10 second automatic cut out for safety.
Charging your Battery
When the battery is empty it will flash 5 times and no longer activate. At this point or when you notice a drop off in performance it will need to be charged.
- Unscrew from your device and screw into your USB charger.
- Connect your charger to any USB slot and allow several hours to charge.
- When fully charged the led on the charger will turn from red to green.
- When it is close to charged it may intermittently flash green. Please wait for the LED to stay constantly green for a complete charge.
Cleaning and Maintaining your Cartomizer Starter Kit
Maintaining you cartomizer starter kit is really simple. We recommend wiping the connection points on your battery with tissue before charging. This will prevent build up and help keep your device clean and working great. We recommend using a separate cartomizer for each flavour you use. Eventually your cartomizer will lose performance and need to be replaced. Your battery should last for at least 300 charges.