How to Fill a Boge Cartomizer

Filling the Cartomizer

1. Remove from packet and remove both plastic covers (condoms)
2. Take the larger of the 2 condoms and remove the plastic plug from within
3. Fill this condom with e-liquid leaving a 0.5 cm gap at the top
4. Remove the rubber cap on the end of the cartomizer using a paper clip or similar
5. Slowly insert cartomizer SCREW END first into the condom until you see the e-liquid come up to the top of the center hole without spilling over
6. As the e-liquid is absorbed slowly push the cartomizer deeper until the e-liquid comes back to the top of the hole
7. Repeat until all the e-liquid is soaked in (this may take several minutes)
8. Allow a few minutes for the e-liquid to soak though the device and add more e-lquid to the top if necessary
9. Gently blow through the top to clear any liquid in the center tube
10. Attach drip tip and connect to battery. The device is now ready and can be re-filled by dripping onto the top material (avoiding the center hole) from now on.

Read more